Toyota Camry Maintenance Light
The best ways to reset upkeep required light on 2004-2015 Toyota Camry:
-With car ignition switched over to ON setting, make certain odometer is showing "Tripmeter A", after that transform the ignition switch to OFF setting
-Push and also hold the JOURNEY reset or MODE switch
-While holding reset button, button ignition to ON placement
** w/ ENGINE START/STOP switch, maintain your foot off brake pedal and press ENGINE START/STOP switch two times to obtain Key On/ Engine Off mode
-Remain to hold the reset switch until the odometer shows "000000" then the initial value is shown
-Transform the car off and also back on to verify reset was accepted
-On the navigating display, press CONFIGURATION
-After that press VEHICLE, after that UPKEEP
-Touch the desired item in which you have to reset (i.e. Engine Oil, Oil Filter, Tire Rotation, etc.).
-From here, fill in the requested areas with the brand-new "Next Solution" period (i.e. date as well as range till following solution schedules).
-Press OK when complete.
-Repeat actions 3-5 for any other services that were done.
-With lorry ignition changed to ON setting, make sure odometer reading is revealed, after that turn the ignition switch to OFF position.
-While holding reset switch, button ignition to ON placement.
** w/ ENGINE START/STOP button, maintain your foot off brake pedal as well as push ENGINE START/STOP switch twice to obtain Key On/ Engine Off mode.
-Continuously hold the reset switch until the odometer shows "000000" and/or the MAINT REQD light goes off.
-Transform the automobile off and also back on verify reset was accepted.
-On the navigation display, press INFORMATION or ARRANGEMENT.
-After that touch MAINTENANCE.
-Touch the preferred product in which you should reset (i.e. Engine Oil, Oil Filter, Tire Rotation, etc.).
-From here, fill in the asked for areas with the new "Next Service" interval (i.e. day following service due and/or distance till next solution schedules).
-Press OK when total.
-Repeat actions 3-5 for any other solutions that were carried out.
We hope you discover these reset procedures practical.